Reflective Essay on thesis Overall Experience Sample

Reflective Essay on thesis Overall Experience SampleIn my opinion, a reflective essay on thesis overall experience sample is the best essay for an English major to write. It covers many themes of the average student's life and how they relate to their major, academic peers, and career. Although it may seem like a daunting task to tackle, in fact, it isn't that difficult. Let's review the format of a reflective essay on thesis overall experience sample and some strategies to make it easier to write.In my opinion, writing a reflective essay on thesis overall experience sample requires:I like to begin with a personal essay about an accomplishment. Students are most likely to relate to something they do that involves their loved ones or is a personal reflection of their life. By giving students a quote from a family member or peer, you can get them thinking about something that they would have otherwise been too shy to share.The students are more likely to want to hear their opinion in t he actual essays. This is also a very powerful way to show that they can express themselves. Personal opinions are usually omitted, but do include in your writing style and sentence structure. Students will learn how to create their own sentences to give their essay a creative quality.One of the other benefits of this type of essay is the possibility to include asides on everyday and typical situations where there is not much time to think about a thesis. You have an opening to break up the essay with such information.On the actual essay, it is important to always provide information that is completely factual. Be sure to write out all sources. Never use any rumors or hearsay as facts. These do not give enough information to a reader's ability to connect the facts and remember what you said.The most important thing to remember is to write a reflective essay on thesis overall experience sample. Do not worry about pleasing your professor, as you can be confident that you have finished your work. You will feel much more confident when you have completed the homework and completed your project.

Social, political and economic conditions which contributed to the rise of the New Right

The New Right became dominant in America’s politics in the late 1970s and early 1980s. The mid-1970s marked a slow transformation of politics and many aspects of America’s history. These included the new right, the new religious right and conservatism of the corporate arena. The new right was not embraced immediately; it triggered a lot of opposition.Advertising We will write a custom essay sample on Social, political and economic conditions which contributed to the rise of the New Right specifically for you for only $16.05 $11/page Learn More The mid 1970s was a central point for conservatism. The cold war liberalism transformed America by ensuring that America’s leadership was not compromised. This conservatism combined the political and social economic resources of America to achieve the objectives (Sigelman 839-851). During the early 1960s, 2 cities located approximately 700 miles away from each other in the areas that were famou s for rice farming were most affected during the Vietnam War in the US. These are Danang and Hue which are densely populated cities (Addington 2). In the1970s and 1980s, although the cold war came to a halt in America, the issues that triggered the conflicts continued being the centre of confusion and controversies in America. It reached a point that America stopped to worry and began to love the atomic bomb. This may be due to the issue of development positive long term effects of the atomic technology (Addington ix). Fears of more atomic bombs being released existed in the U.S. This was especially after the American government, according to reports in the early 1990s, unveiled radioactive substances as a form of scientific experiments. One of the experiments conducted by the government involved giving foods that contained radioactive substances to several teenagers. This was to investigate the digestion process of the human body. Such experiments raised controversies in the countr y. These, among other issues, continue being a cause of worry for the American citizens, decades after the end of the war (Addington 200). Therefore, life in America changed after the new right policies came to be. The new right polices caused great cultural alterations to the Americans in regards to living with the aftermath of the atomic bombs and the impacts of the war. The technological advancements effects were also felt in the country. People could now discover weapons and other crucial equipment that could be used in other wars as defensive measures against their enemies. Some equipment could also be used for hunting purposes.Advertising Looking for essay on history? Let's see if we can help you! Get your first paper with 15% OFF Learn More One of the major factors that contributed to the rise of the new right is the rise of the technology of printing in America. This issue enabled Americans to effectively disseminate important information in the forms of pamphl ets and publications. Thus, according to Albert Einstein, the atomic bomb transformed all things on earth except for man’s nature. The Nagasaki and Hiroshima bombings further elaborate the pace of these atomic bombs in America. By the 1980s, Americans began accepting and absorbing the revolution of the new right policies, into the culture of America. This meant that the cultures, values and expectations of the Americans were transformed greatly. Americans slowly began to understand and appreciate the politics and technological benefits of the atomic era (Addington xvi-xix). The many crisis and conflicts that were rampant in America also led to the rise of the right. This involved the declining economy of America, the high rates of domestic conflicts in Americans’ families and radical societal movements that criticized the features of the society of America. Another aspect was the increasing demands of Americans that outran the available resources in America. These issu es eroded the confidence of Americans, leading to a need for a change. Any possible alternatives were welcome (Margot 400-451). Although at that point America could view the culture as one that was armed with security (due to the fact that new weapons could be formed), there were aspects of chaos, confusion, controversies and split ideas that existed after the new policies. There was now a culture of atomic consensus in America. The war had evidently caused disintegration or a split in the cultures of Americans. Thus, at first, there was immorality, insecurity, insanity and people rebelling. Signs of danger, corruption, and alienation could also be felt. The old culture and ideological age in America came to an end with this rise of the new right era. This old age was the era where the laissez faire system of governance existed. A new era of a mixed economy, a system of decentralization and political pluralism was gradually being felt in America. This end of ideology in America is w hat is referred to as the rise of the new right. Moreover, the new right disrupted the political and cultural life and social aspects of America. The politics of America needed to change. The need for Political values that were not concerned with the interests of materialistic goals triggered the move to the new right. It was time that America practiced politics that embraced all the values and interests of all American citizens. Many activist groups joined efforts to support the new right. Another aspect that led to the rise of the new right is the citizens’ need for transition to new socioeconomic and cultural ranks. Everyone was optimistic that these new ranks were possible if the new right existed. This was Americans’ silent cry of suffering (Sigelman 839-851).Advertising We will write a custom essay sample on Social, political and economic conditions which contributed to the rise of the New Right specifically for you for only $16.05 $11/page Learn More The new right also led to a new group of elites, who had credible professional and technological knowledge. The right fought for the rise of modernity. Modernity meant adverse forces that could change the politics, culture, economies and social aspects of America. After the rise of these new policies, the capitalist system was also transformed and stabilized. Monopoly was eating up America. Thus, there was a need for change. The government regulated the social welfare of Americans and the economy. Collective bargaining was also regulated. Embracing this reformed capitalist system would mean a rise to an America that is rational, results-oriented and reasonable (Sigelman 839-851). The government provided social insurance services as a way of transformation. This included sponsorships of development projects in suburban areas and also development of facilities in public hospitals. The cost of labor was also reduced. All these aspects reduced the government expenditu res and increased revenues. New businesses and corporations also emerged; the electorate and the elites were realigned. The New Religious Right led to the emergence of evangelism that transformed the moral standards and social orders of America. Abortion issues were abolished and modernization adopted. Thus, the traditional methods of religion became a thing of the past. Despite there being expressions of anger, despair and anxiety, the citizens were ready to embrace Cultural Revolution that resulted from the new right. Black humor participated a lot in this revolution. This is the movies, theatre, music and literature that were referred as the popular culture (Sigelman 839-851). An example of the weapons arising from the technological advancements in America is the boat described in San Francisco in Wolfe, Tom’s book. Also, the neon martini glasses in a truck and a pistol in the hands of an Indian lady as described in the book. The discussion shows that people’s ideas and perceptions were changed from following a certain direction towards following another beneficial one. Transition was initially hard, but with time, people were able to embrace changes (Wolfe 18-100). In the book ‘there are No Children Here’, there’s a sad account of two young boys, Lafayette Rivers and Pharoah, his younger brother that thrived in harsh conditions in a Henry Horner Homes Chicago’s housing project. The two were around 12 years and 9, in 1985. The ghetto was surrounded by high crime rates, poverty, drug abuse, and negligence yet the young ones struggled to survive.Advertising Looking for essay on history? Let's see if we can help you! Get your first paper with 15% OFF Learn More Lafayette struggled by trying to make himself an automaton, playing the stern father figure of the family. This meant that he was a source of security for the family. Pharoah struggled by beating all odds and excelling in school. The book and the lives of these struggling boys changed the perspectives of Americans on life’s issues. It is evident that the social lives and conditions can be harsh and poor but the people must be willing to change. The boys’ struggles with the harsh neighborhood explain the transformation in the schools, the courts systems and the rehabilitation centers in America. Their life is an inspiration that despite the many bad things that happened in the 1980s era, it is possible to survive. This helped to change the perception of life by the Americans (Kotlowitz 300-336). Works Cited Addington, Larry .America’s War in Vietnam: A Short Narrative History. USA; Indiana University Press. 2000; 1-210. Web. Kotlowitz, Alex. There Are No Children Here: the Story of Two Boys Growing up in the Other America. USA; Knopf Doubleday. 1992; 1-336. Print. Margot, Henriksen. Dr. Strangelove’s America:Â  Society and Culture in the Atomic Age. London; England .University of California Press. 1997; 1-451. Web. Sigelman, Lee. Two Reagans? Genre Imperatives, Ghostwriters, and Presidential Personality Profiling. 2002; 839-851. Print. Wolfe, Tom. The Electric Kool-Aid Acid Test. New York. Farrar, Straus Giroux, 1968; 1-224. Library of Congress. Web. This essay on Social, political and economic conditions which contributed to the rise of the New Right was written and submitted by user Pa1ge to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Scanning Tunnelling Microscopy Essay Example

Scanning Tunnelling Microscopy Essay Example Scanning Tunnelling Microscopy Essay Scanning Tunnelling Microscopy Essay The STM with its unmatched combination of high vertical and lateral resolution in a promising new tool that can be operated under ambient conditions, yielding three-dimensional detailed images, (H. Strecker and G. Persch, 1990, p441-445). The scanning tunnelling microscope (STM) is a solid-state microscope based on the principle of quantum mechanical tunnelling of electrons between a sharp tip and a conducting sample. Surfaces can be studied by allowing the individual atoms to be imaged in real space. By scanning the tip across a sample surface it is possible to image directly the three dimensional structure of a surface down to atomic scale resolutions. Prior to the invention of STM, the only way that surface structures could be deduced was by more indirect methods such as low energy electron diffraction (LEED) or medium-energy ion scattering (MEIS). Technique The tip used in STM is very sharp and ideally terminates into a single atom. The tip is mounted onto a system of piezo electric drives, which provide movement in three dimensions. (http://nanowiz.tripod.com/stmbasic/stmbasic.htm, 14/10/03). The movement is controllable with sub-atomic scale accuracy and can be brought within a few Amstroms of the conducting sample surface. The metallic tip and the conducting substrate are in very close proximity but are not in actual physical contact, ( chem.qmw.ac.uk/surfaces/scc/, 7/10/03). At separations as small as this, the outer electron orbitals of the tip and sample overlap. On the application of a bias voltage between the tip and the surface, electrons are able to tunnel through the vacuum barrier via the quantum mechanical tunnelling effect. The direction of current flow is determined by the polarity of the bias. If the sample is biased negative with respect to the tip, then electrons will flow from the surface to the tip as shown above, whilst if the sample is biased positive with respect to the tip, then electrons will flow from the tip to the surface as shown below. (chem.qmw.ac.uk/surfaces/scc/, 7/10/03). The exponential (in vacuum) decay of the electron wavefunctions means that the tunnelling current is extremely sensitive to the tip-sample separation. This provides a very fine resolution of the surface. Quantum Mechanical Tunnelling The infinite potential walled particle in a box theory does not allow any of the wave function to escape the box as it would have to have more than infinity energy to cross the barrier. Allowing the potential energy well to be a finite number has the effect of making it possible for the wave function of a particle that is trapped in this potential well, to partially escape and thus have a presence outside the confines of the box. The wave function can transverse the potential barrier, although it will decay exponentially through the barrier. Assuming that the wave function does not totally decay away before the end of the barrier, the particle can have a physical presence on the other side of the potential barrier. If the potential barrier is long range, then the wave function will decay away exponentially and tend towards zero. Upon reaching the end of the potential barrier, the particle will have an infinite small wave function and zero presence on the other side of the barrier. This property is known as quantum mechanical tunnelling. (chembio.uoguelph.ca/educmat/chm729/STMpage/stmdet.htm,10/10/03). The quantum mechanical phenomenon creates the high degree of sensitivity necessary for atomic scale imaging of surfaces. The quantum mechanical tunnelling current is highly dependent on the tip-surface distance. The distance between tip and surface is usually of the order of 0.3 nm and the tunnelling voltage V ranges from a few mV up to a few V, depending on the conductivity of the surface. The tunnelling current typically varies between 10 pA and 1 nA, (fys.kuleuven.ac.be/vsm /spm/introduction.html12/10/03). The tunnel current decreases to 1/10 of its initial value for every 0.1 nm increase in gap separation, (Kaiser, W. J. Stroscio, J. A., 1993, p78) The essential aspect of STM is the extreme sensitivity of the tunnelling current to the tip sample separation. It is therefore important to realise that the tunnelling current is a quantum phenomenon. In classical physics the current could not flow across a gap. Modes of Operation Constant height mode In this mode the vertical position of the tip is not changed, equivalent to a slow or disabled feedback. The tunnelling current varies depending on topography and the local surface electronic properties of the sample. The current as a function of lateral position represents the surface image. This mode is only appropriate for atomically flat surfaces. If the surface were not flat, the STM tip would crash. An advantage of constant height mode is that it can be used at high scanning frequencies (up to 10 kHz). (http://instruct1.cit.cornell.edu/courses/ee476/FinalProjects/s2002/sm242/stmdesign.htm, 12/10/03). Constant current mode In the constant-current mode, the current is used as the input to a feedback circuit that moves the scanner together with the tip up and down in the height direction. With an applied potential, the tip is brought close to the sample surface until the tunnelling current set point is detected, at which point the constant-current feedback loop is locked. When the tip moves laterally to a new position, any subtle sample-tip distance variation will lead to the fluctuation of the tunnelling current. Consequently, the feedback circuit will move the tip up and down until the current keeps the set-point value. As a result, the moving tip keeps the constant sample-tip distance, tracing the surface topography. The main advantage of constant current mode is that the tip will not crash into a large cluster of atoms at the surface. Constant current mode can measure irregular surfaces with high precision, but the measurement takes more time, (http://std2.fic.uni.lodz. pl/stm.html, 13/10/03). (http://instruct1.cit.cornell.edu/courses/ee476/FinalProjects/s2002/sm242/stmdesign.htm, 12/10/03). Tip etching The construction of the tip is one of the most crucial aspects of STM. The tip must be approximately one atom thick in order for the STM to be carried out effectively. Surface pictures can appear to be distorted due to the presence of more than one sharp protrusion, (Ouseph, P. J. Gossman, M., 1998, 701-704). Some important characteristics of a tip are * Sharp tips which allow high resolution STM observations * Small resonance area * Thick taper to reduce tip oscillation during STM scans (mme.wsu.edu/~reu/poster2000/Ronald2000/ronald/ppframe.htm, 14/10/03) Multiple tips can be formed when suspended particles are picked up from the etching solution, (NaOH, KCN). Multiple tips often lead to the occurrence of shadow effects and ghost images, (physik.tu-berlin.de/institute/IFFP/daehne/ index.htm?/institute/ IFFP/daehne /forsch/rs-tips.htm, 20/10/03). Conditions The STM can operate in many different kinds of environments. A simple STM can be run in ambient air. However, in order to achieve effective results in Surface Science the STM is run in ultra-high vacuum. Vibration Isolation As the tip is oscillating across a very small area, it is important to isolate vibration. Vibration is kept to a minimum by several methods. Placing the STM on a spring/damping table is one way to cut out vibrations travelling through the floor. The first typical isolation system is the coiled spring suspension with magnetic damping and the second is a stack of metal plates with viton dampers between each pair of steel plates, (Kaiser, W. J., 1993, pp58). The basement level of a building is preferred because there are lower level of vibrations. To stop wave propagating through the air, a foam cover can be placed over the instrument, (mme.wsu.edu/~reu/Matt/Matt.htm, (19/10/03).

Psychoneuroimmuniology - The relationship between dealing with death Research Paper

Psychoneuroimmuniology - The relationship between dealing with death and patients with leukemia - Research Paper Example The immune system works hand-in-hand with the brain to control temperature in the body and sleep. Coordination between the nervous and the immune system facilitates communication by initiating the release of certain hormones. The nervous system regulates the release of neurotransmitters thus enhancing the body’s ability to sense danger and provides the necessary response. A common issue in PNI is stress, which refers to the increase in undesirable tension that inhibits proper body functioning. It is a known fact that anxiety, depression and issues related to stress have an impact of the immune system of an individual. To put the matter into perspective, health defects for instance arthritis and heart disease are mainly attributable to stress. According to Upton (2013), in the occurrence of stress, the hypothalamus produces hormones that the immune system works on to create energy necessary for quick response. It is important to point out that foods that enhance inflammation contain starch and fats contents. Biologically, starch influences the levels of insulin and glucose in the blood. A high level of insulin does not only increase stress but it also results in depression. Insights from the concept perceive depressed people to be more prone to osteoporosis and myocardial infarction. Troubled association between the immune and the nervous system delay s the healing process. The relevance of PNI stems from the ability to exercise control on stress thereby strengthening the body and mind of a person. As per research, PNI is a promising field that may revolutionize the functioning of the immune system by connecting the mind and the body. Improving the defence mechanism reduces illnesses thereby making health to be stable. Procedures of biofeedback make it possible to treat cases of anxiety and migraine among patients (MateÃŒ , 2011). This is because sensors involved in the procedures enable individuals to exercise the relaxation of muscles and

An eclectic slant towards a functional education Essay

An eclectic slant towards a functional education - Essay Example Viewed on a micro level, there seems to be nothing wrong with it; however, when it is seen on a much larger scale, many problems begin to surface out. Although it might be a sweeping generalization to claim that most high schools in the United States exist in order to prepare their students for higher education, it still remains a fact that the existing curricula in the Unites States are mainly geared towards making them smart â€Å"test takers.† According to sociologists, educators definitely have their own reasons for designing their respective programs of study; and undeniably, each state or even district has its own set of curricula. Nevertheless, it still cannot be categorically denied that most high schools in the United States exist in order to prepare their students for tertiary education. This can be clearly seen in the curricula of most public and private learning institutions wherein math, science, and humanities take up a large chunk of their learning time. What do es this tell us? Simple. They are being molded to the kind of citizens they expect them to be without thoroughly considering the existing needs and demands of the society. The bandwagon still wins. Medicine, law, business management, banking and finance, and other related courses still rank (and perhaps perceived) as the most desirable fields of endeavor. As a result, high school graduates dream of becoming one; and they cannot be blamed for aiming to become one due to the glamour, prestige and financial rewards that such professions provide. However, for the society to function well, it needs to have different kinds of people with different skills and discipline that can help towards the realization of its goal: dynamic growth and development.

Pre-fabrication Technology and Conventional Construction

Pre-fabrication Technology and Conventional Construction 1.1 Introduction Construction industry plays an important role in Malaysias economy. Therefore, it is important to introduce more advance or new technologies from overseas to our country in order to growth the economy. Pre-fabrication technology is a new construction method in construction industry. This technology has been widely used in many countries due to many pros it has over the traditional construction methods, which is cast in-situ method. Pre-fabrication is the assembling components making in a factory or manufacturing before deliver those components to the construction site. After completed the selected components on factory or manufacturing, those components will transport to the construction site where the structure is to be located. On the other hand, for conventional construction method, which is cast in-situ, is transporting those selected materials like cement, sand, aggregate, brick, etc from factory or manufacturing to the construction site. Then the assembly only will carry out on site after those materials have delivered to site. Industrialised Building System (hereinafter referred to as ‘IBS) is a technique of construction, which introduced by Construction Industry Development Board (hereinafter referred to as ‘CIDB) was succeed and applied the pre-fabricated technology into the construction industry in Malaysia. IBS is define as a construction system in which components are manufactured in a factory, on or off site, positioned and assembled into structure with minimal additional site work (CIDB, 2003). The first IBS project was a 7 blocks of 17 storeys flats, which involved 3000 units of low-cost flat and 40 units of shop lot along Jalan Pekeliling in the late 1960s. In addition, there have some of the projects been satisfied completed by used of IBS components such as campus building, apartment, residential, office, hospital, etc. 1.2 Problem Statement Pre-fabrication technology has become more and more famous and popular in Malaysias construction industry recently. This is due to the technology has many benefits over the traditional construction methods which is cast in-situ technology. However, it also contains some weaknesses for pre-fabrication technology. For example, the transportation costs may be very expensive to deliver the complete components to the construction site. Not only that, the maintenance cost and repairing cost is higher depend to the cast in-situ method. Therefore, for long term buildings are not suitable to construct by using pre-fabrication technology. 1.3 Aim The aim of this research is to compare the construction speed for typical wall element between pre-fabrication technology and conventional construction method, which is cast in-situ. 1.4 Objectives To define Industrialised Building System (IBS) There have some of the projects been satisfied completed by IBS of using pre-fabricated components such as campus building, apartment, residential, office, hospital, etc. To compare the advantages and disadvantages of using pre-fabrication technology and cast in-situ in construction industry Although pre-fabrication can save more construction costs and decrease construction period, but the demand of using this technology are still very low in Malaysia. To compare the construction speed by using pre-fabrication technology and cast in-situ in typical wall element In practically, the construction period of a project can take few years to complete. By using pre-fabrication technology, the construction period can be decrease, which compare with traditional construction method. 1.5 Hypothesis By using pre-fabrication technology is cheaper and efficiency than traditional method, which is cast in-situ technology. 1.6 Research Methodology There have three different types of research studies relating to the pre-fabrication and cast in-situ technology have carried out to fulfill this dissertation. They are literature review, questionnaire and case study. 1.6.1 Literature Review The study undertakes a comprehensive review of the relevant literature on the subject of pre-fabrication and cast in-situ technology. The resources for literature are from books, magazines, journal and articles, which available from library and internet research. 1.6.2 Questionnaire This stage involved preparing and sending out the questionnaire to number of Construction Company in Malaysia. The questions are mainly asking about the actual construction speed by using pre-fabrication technology in Malaysia. 1.6.3 Case Study Few case studies for pre-fabrication technology in Malaysia will be carrying out for this research, either in supplier and/or in construction. Through these case studies, the problems, benefits and cost for pre-fabrication technology in actual construction industry can defined. 1.7 Scope of Study The scope of study for this research included to define the background of the IBS system as well as the previous projects done by IBS system with satisfied completed in Malaysia. Besides, research on the advantages and disadvantages of the pre-fabrication and cast in-situ methods. In addition, it will cover the construction speed for actual construction projects, mainly in Malaysia. Pre-fabrication Technology and Conventional Construction Pre-fabrication Technology and Conventional Construction 1.1 Introduction Construction industry plays an important role in Malaysias economy. Therefore, it is important to introduce more advance or new technologies from overseas to our country in order to growth the economy. Pre-fabrication technology is a new construction method in construction industry. This technology has been widely used in many countries due to many pros it has over the traditional construction methods, which is cast in-situ method. Pre-fabrication is the assembling components making in a factory or manufacturing before deliver those components to the construction site. After completed the selected components on factory or manufacturing, those components will transport to the construction site where the structure is to be located. On the other hand, for conventional construction method, which is cast in-situ, is transporting those selected materials like cement, sand, aggregate, brick, etc from factory or manufacturing to the construction site. Then the assembly only will carry out on site after those materials have delivered to site. Industrialised Building System (hereinafter referred to as ‘IBS) is a technique of construction, which introduced by Construction Industry Development Board (hereinafter referred to as ‘CIDB) was succeed and applied the pre-fabricated technology into the construction industry in Malaysia. IBS is define as a construction system in which components are manufactured in a factory, on or off site, positioned and assembled into structure with minimal additional site work (CIDB, 2003). The first IBS project was a 7 blocks of 17 storeys flats, which involved 3000 units of low-cost flat and 40 units of shop lot along Jalan Pekeliling in the late 1960s. In addition, there have some of the projects been satisfied completed by used of IBS components such as campus building, apartment, residential, office, hospital, etc. 1.2 Problem Statement Pre-fabrication technology has become more and more famous and popular in Malaysias construction industry recently. This is due to the technology has many benefits over the traditional construction methods which is cast in-situ technology. However, it also contains some weaknesses for pre-fabrication technology. For example, the transportation costs may be very expensive to deliver the complete components to the construction site. Not only that, the maintenance cost and repairing cost is higher depend to the cast in-situ method. Therefore, for long term buildings are not suitable to construct by using pre-fabrication technology. 1.3 Aim The aim of this research is to compare the construction speed for typical wall element between pre-fabrication technology and conventional construction method, which is cast in-situ. 1.4 Objectives To define Industrialised Building System (IBS) There have some of the projects been satisfied completed by IBS of using pre-fabricated components such as campus building, apartment, residential, office, hospital, etc. To compare the advantages and disadvantages of using pre-fabrication technology and cast in-situ in construction industry Although pre-fabrication can save more construction costs and decrease construction period, but the demand of using this technology are still very low in Malaysia. To compare the construction speed by using pre-fabrication technology and cast in-situ in typical wall element In practically, the construction period of a project can take few years to complete. By using pre-fabrication technology, the construction period can be decrease, which compare with traditional construction method. 1.5 Hypothesis By using pre-fabrication technology is cheaper and efficiency than traditional method, which is cast in-situ technology. 1.6 Research Methodology There have three different types of research studies relating to the pre-fabrication and cast in-situ technology have carried out to fulfill this dissertation. They are literature review, questionnaire and case study. 1.6.1 Literature Review The study undertakes a comprehensive review of the relevant literature on the subject of pre-fabrication and cast in-situ technology. The resources for literature are from books, magazines, journal and articles, which available from library and internet research. 1.6.2 Questionnaire This stage involved preparing and sending out the questionnaire to number of Construction Company in Malaysia. The questions are mainly asking about the actual construction speed by using pre-fabrication technology in Malaysia. 1.6.3 Case Study Few case studies for pre-fabrication technology in Malaysia will be carrying out for this research, either in supplier and/or in construction. Through these case studies, the problems, benefits and cost for pre-fabrication technology in actual construction industry can defined. 1.7 Scope of Study The scope of study for this research included to define the background of the IBS system as well as the previous projects done by IBS system with satisfied completed in Malaysia. Besides, research on the advantages and disadvantages of the pre-fabrication and cast in-situ methods. In addition, it will cover the construction speed for actual construction projects, mainly in Malaysia.

Educational Goals and Philosophy Essay -- Teaching Learning School Ess

Educational Goals and Philosophy It was the last day of school. My daughter's 3rd grade class had just chosen to have me read to them instead of playing a game. As I explained that we wouldn't be able to finish the rest of the chapter book I had begun several weeks before, I suggested "You can check it out at the library and finish it over the summer". One little girl looked up at me in disappointment and said, "but it wouldn't be the same as hearing you read"! My heart melted and the final reason was added to my ongoing mental list of why I should begin to pursue a teaching degree at the age of 35. Children are creative, enthusiastic, honest, inquisitive, loving, and full of energy! Yet at times they become easily bored, disappointed, frustrated, indignant, and stubborn. Even with all these seemingly contrasting characteristics in common, each child is a unique person with talent and potential for achievement, but also different learning styles. As a teacher, helping to develop each child's capacity for learning will be compounded by many factors. Such as, emotional or personal turmoil due to family issues at home, personality and temperament conflicts within the classroom, learning disabilities, physical disabilities, and the simple fact that there are too many children to teach at the same time. With all these different needs in the classroom, good classroom management is a must in order to begin to determine what will work best for each child. Keeping disruption of time to a minimum will require consistency in discipline. Rules that are easy to understand and created wi th the students are my goal, with consequences followed through consistently in order to establish a sense of fairness and security to each s... ...Bachelor's Degree in Elementary Education here at Concord College. I would like to complete several years experience in the classroom, preferably the early grades, and at that time I hope to begin the requirements for my Master's Degree, if available, here at Concord also. I plan to stay in the Southern West Virginia area, as I have strong family ties here, having been raised in Raleigh County. Teaching is a dream I have had for several years now, motivated by the challenges and rewards of parenting, and by volunteering in my own children's classrooms. Becoming a teacher is a natural extension of being a parent, where the roles of both are training and guiding young lives in order to prepare them for the adult world. Choosing the path of the teacher will allow me to continue to experience one of the greatest joys in life - making a difference in the life of a child.